Fire Rated Loft Hatch, Part L Compliant (Push-Up) 536 x536mm

• 1 Hour Fire Rated Loft Hatch
• Push up (not hinged)
• Part L Compliant
• Easy to install
• To fit  a ceiling cut out of 555 x 555mm (when lined with 9.5mm plasterboard) actual hatch size is 536 x 536mm

The "SP1" is a budget steel push-up 60-minute fire-rated loft access hatch with a simplistic design.

With its powder-coated zintec steel smooth white maintenance-free finish. The loft door and frame require no painting and fit almost flush to the ceiling.

Once the push-up loft door is removed, it has a clear opening of 520 mm x 520 mm.

It is insulated with a massive 100 mm of fire-resistant mineral slab insulation to comply with the building regulations 0.35 "U" value.

The SP1 loft hatch is draught-sealed between frame and lid to virtually eliminate warm air leakage.

White colour is RAL No. 9010 with 20% gloss.

The ceiling cut-out (trim) size for the loft hatch is 555mm x 555mm.

Easy-to-fit instructions are on the box.

Strictly compliant with the following regulations:

UKAS-accredited 1-hour fire test.

Part "L" of building regulations i.e. 0.35 "U" value.

NHBC compliant for attic doors, including 520mm clear opening in any direction.

UKAS-accredited air infiltration test compliant for loft hatches without the addition of sealant to the external frame.

In addition:

Insulation used is CFC & HCFC free, ODP zero and compliant to Eco Homes standards of a GWP (global warming potential) rating of zero.

The SP1 loft access trap box packaging is 100% recycled & recyclable.

Please note that the SP1 is not hinged and cannot be used with any of our loft ladders.