This roof dome has a much lower profile than most other domes on the market. The flatter shape makes the dome stronger and most people prefer the look of a low rise dome compared to the typical "bubble" style dome (see image gallery for comparision). The cassette glazing used in the double and triple glazed domes means each of the glazing layers is separated, minimising the chance of condensation between the layers. This is the only range on the market with all sizes to benefit from cassette glazing,
Measure the outside edge to the outside edge of the upstand, this product will fit an upstand up to 18mm bigger or 60mm smaller than the nominal dome size as shown below
A 900x900mm Dome can fit an upstand from -60mm smaller (840x840mm) or up to 18mm bigger (918x918mm).
Mardome Reflex is a glazing only unit designed specifically for refurbishment projects where the glazing only needs to be replaced. The unit is supplied with a fixing kit including weathertight washers and cover plugs. Manufactured from Marlon FSX Longlife polycarbonate, this glazing unit is up to 200 times stronger than glass. The high resistance to breakage and adverse weather conditions means Mardome Reflex is very safe and reliable
The following sizes are also available but not listed on our website - Please contact us for a price and availability
|450 x 450mm||1350 x 600mm||1500 x 600mm||1650 x 600mm||1800 x 600mm||1950 x 750mm||2100 x 900mm||2250 x 1050mm||2400 x 1200mm|
|750 x 600mm||1350 x 750mm||1500 x 750mm||1650 x 750mm||1800 x 750mm||1950 x 900mm||2100 x 1050mm||2250 x 1200mm||2400 x 1350mm|
|1050 x 900mm||1350 x 900mm||1500 x 900mm||1650 x 900mm||1800 x 900mm||1950 x 1050mm||2100 x 1200mm||2250 x 1350mm||2400 x 1500mm|
|1200 x 750mm||1350 x 1050mm||1500 x 1050mm||1650 x 1050mm||1800 x 1050mm||1950 x 1200mm||2100 x 1350mm||2250 x 1500mm||2400 x 1650mm|
|1200 x 1050mm||1350 x 1200mm||1500 x 1200mm||1650 x 1200mm||1800 x 1200mm||1950 x 1350mm||2100 x 1500mm||2250 x 1650mm||2400 x 1800mm|
|1350 x 1350mm||1500 x 1350mm||1650 x 1350mm||1800 x 1350mm||1950 x 1500mm||2100 x 1650mm||2250 x 1800mm|
|1500 x 1500mm||1650 x 1500mm||1800 x 1500mm||1950 x 1650mm||2100 x 1800mm|
|1650 x 1650mm||1800 x 1650mm||1950 x 1800mm|
|1800 x 1800mm|
Note: Textured is available at the same price as the equivalent size clear or opal dome - Please telephone to order
Outer dome is 3mm impact resistant longlife polycarbonate which has a UV Protective coating on both sides. This coating stabilises the product to avoid discolouration and weakening due to exposure to sunlight. Where double and triple glazed domes are being used, the inner domes are 2mm thick impact resistant longlife polycarbonate sheet. Polycarbonate is light weight and has an impact strength 200 times greater than glass which makes breakage very difficult.
Building Regulations Approved Document B (2006 edition amended 2007) sets out the rules for fire safety of buildings, which can be met by achieving specific fire ratings to either British (BS476) or European (BS EN 13501) test standards.
Brett Martin Daylight Systems Mardome Reflex Rooflights achieve Class B s1, d0 to BS EN 13501: Part 1. Building Regulations state they can be regarded as Broof (t4).
Reflex rooflightas achieve Class B non-fragility to ACR[M]001 when new and fully installed in accordance with the manufacturers installation guide
Foot traffic on all rooflights should always be avoided; impacts such as foot traffic or a falling person may cause damage which may necessitate rooflight replacement
Mardome Reflex Rooflights are designed to remain fit for purpose in normal industrial conditions for a period of 20 years (Guaranteed for 10). They will not become perforated, lose signifiacnt structural integrity or distort to the extent of losing weather-tightness. In addition the polycarbonate used is guaranteed against loss of daylight transmission, discolouration or loss of impact strength for 10 years.
Mardome Roofligths are designed and manufactured under an ISO9001 approved quality system
BBA Approval - Full BBA approval under 06/4385
Please note, due to the nature of this product our standard returns policy does not apply. Returns will be subject to a restocking fee. The product must be returned in the condition it was dispatched in (i.e. in saleable condition in it's original packaging).
The lead times and delivery service are displayed against each product, just below the price.
We will continue to send items on a Next working day delivery, but please accept delivery might take longer, this is out of our control.
Please note, for certain products and delivery zones we can offer AM deliveries and Saturday Deliveries, if available, you'll be able to select and pay for these options via the checkout.
Delivery Charges will be applied for deliveries to geographical areas represented as Zones C, D and E:
This includes certain parts of Scotland, Scottish Islands, Northern Ireland, Channel Islands and IOM)
You can return a standard product (most access panels and loft hatches) within 14 days of receipt. Roof domes, Roof Lights, Roof Hatches and AOV Smoke Vents will be subject to a collection restocking fee.
Please note Made to measure products cannot be returned.
Click here to download a return form.