What measurements do we need in order to make your hatch?
Please supply us with the length and width of your loft opening (the distance between the joists) in mm and then deduct 5mm from each measurement (please note you'll be asked to do this when placing your order). This is to allow for the loft opening being marginally out of square and gives a small tolerance when fitting the hatch (please call for advice if unsure or the opening is badly made). The external frame will extend 25mm on each side beyond these dimensions, we can extend this to 50mm if required (you'll be offered this option when placing your order).
A high quality, precision made hinged metal loft hatch suitable for all types of house. Each hatch is made to your exact measurements. the hatch is designed to be subtle and clean with a minimal protrusion of 7mm from the ceiling when fitted. All hinges and fixings are also concealed. The lid is fitted with a neat alloy lock.
Construction and finish Each hatch is fabricated from corrosion resistant 1mm Zintec Steel (Zinc coated). The frame and lid are powder coated white RAL No. 9010 with 20% gloss for a satin finish. The hatch frame depth is 63mm (going up into the loft).
Insulation and draught resistance
A primary function of any loft hatch should be to keep heat in your home and cold air draughts in your loft. Loft Hatches are an increasingly important part of building regulations relating to the conservation of heat and power within our homes.
Our hatch design features a concealed seal between the loft door and the frame. This results in an incredible airtightness rating. The lid is filled with 50mm of exposed mineral wool insulation. This hatch has a U value of 0.32 and complies with the requirements of Part L Building Regulations.
Standard - Tri-drive lock with an O-ring seal on the shaft for the ultimate airtightness. Free Pole included as standard.
Key lockable - key operated. Not compatible with pole.
Both lock options operate a chamfered cam which progressively applies pressure when closed to ensure the best possible airtightness.
The hatch is actually 63mm deep (from the ceiling line, up into the opening).
Quoted in working days (sat/ sun not classed as working days).
Installing your loft hatch
Every hatch is supplied with easy to follow installation instructions and screws for fixing the frame in place. To install, screw fix the hatch to the timber surrounding the loft opening.
The insulation used within this hatch is CFC and HCFC free. The ODP is zero and is compliant to the code for sustainable homes standards with a global warming potential (GWP) of zero.
Questions from previous customers
Q How wide is the hatch/ frame surround?
A 25mm as standard, we can increase this up to 50mm, to do this please select the 50mm frame option.
Q Does the frame have to be an equal width on all sides?
Q My loft hatch is bigger than 900x900mm, can you make a bigger hatch?
A Yes, but using a different design. Please telephone us on 01937 325 325
Q Do you supply and insulation cover?
A Yes, it's an optional extra.
Q My opening is out of square, is the 5mm deduction enough?
A Please call for individual advice on the matter.
Please note this product is non-returnable
Applies to the vast majority of our customers and all but one of our products (more information on this later).
The lead times and delivery service are clearly displayed against each product, just below the price.
Please note, for certain products and delivery zones we can offer AM deliveries and Saturday Deliveries, if available, you'll be able to select and pay for these options via the checkout.
Delivery Charges will be applied for the following reasons:
You're outside of UK Zones A&B (Certain parts of Scotland, Scottish Islands, Northern Ireland, Channel Islands and IOM)
To view our delivery zones please View our delivery zones
We're unable to offer the following product/s with Free delivery:
Stira Loft Hatch/ Ladder combined
You can return a product within 14 days of receipt. Please note Made to measure products cannot be returned