The Made to Measure SDS loft trap has an innovative concealed continuous hinge and a flush lid to frame, contributing towards its unobtrusive look.

The loft hatch has a neat steel, silver tri-drive budget lock with a built in chamfer for a smooth closing action.

In addition to the draught seal between the frame and lid, the SDS loft hatch has an extra concealed draught seal between the frame and ceiling, providing a phenomenally high air seal rating. This virtually eliminates vapour ingress and/or warm air leakage; it also makes for easy decoration of the ceiling up to the edge of the frame.

The loft hatch frame and lid are white colour RAL No. 9010 with 20% gloss.

Easy to install instructions are printed on the loft trap box.

The loft access trap insulation is CFC & HCFC free, ODP zero and compliant to Eco Homes standards of a GWP (global warming potential) rating of zero.

When ordering the loft hatch, we would recommend measuring the ceiling cut out (trim size) and deducting 5mm, in case the joists and noggins are not perfectly square. In addition the loft hatch will be hinged on the short side unless stated otherwise.

Delivery is 7 days from Tuesday lunchtime order cut-off point.

The loft door has a 25mm flange that projects beyond the fitting size, The SD loft hatch has concealed hinges and a completely flush lid to frame, this helps to contribute towards its unobtrusive look.

The loft access door has a neat tri-drive budget lock with an integral chamfer for a smooth closing action. A tamper proof double-pin recessed lockable version is available (SDL). However, a lock can be purchased at a later date, for retro fit into the SD if required.

In addition to the draught seal between the loft hatch frame and lid, the SD loft hatch has an extra concealed draught seal between the frame and ceiling. This virtually eliminates warm air leakage and vapour ingress, it also assists with ease of decoration of the ceiling up to the edge of the loft access trap frame.

The loft hatch colour is white RAL No. 9010 with 20% gloss.

The hatch ceiling cut out (trim) size is 755mm x 555mm.

The loft hatch is easy to fit, weighing only 7.6kg, with fitting instructions on the box.

Strictly compliant to the following regulations:

UKAS accredited 1 hour fire test.

Part "L" of building regulations for loft hatches i.e. 0.35 "U" value.

NHBC compliant for loft doors, including 520mm clear opening in any direction.

UKAS accredited air infiltration test compliant for loft access hatches without the use of sealant to the external frame.

In addition:

The insulation used in the loft hatch is CFC & HCFC free, ODP zero and compliant to Eco Homes standards with a GWP (global warming potential) rating of zero.

The SD loft access hatch box packaging is 100% recycled & recyclable.

In addition to the draught seal between the frame and lid, the SDSL loft hatch has an extra concealed draught seal between the frame and ceiling, providing a phonemenally high air seal rating. This virtually eliminates vapour ingress and/or warm air leakage, it also makes for easy decoration of the ceiling up to the edge of the frame. The loft hatch frame and lid are white colour RAL No. 9010 with 20% gloss. The loft access trap insulation is CFC & HCFC free, ODP zero and compliant to Eco Homes standards of a GWP (global warming potential) rating of zero. When ordering the loft hatch, we would recommend measuring the ceiling cut out (trim size) and deducting 5mm, in case the joists and noggins are not perfectly square. In addition the loft hatch will be hinged on the short side unless stated otherwise. Delivery is 7 days from Tuesday lunchtime order cut-off point. Maximum size is 1000x900mm (please call to discuss if larger).

The SDL has a new improved, secure seven pin radial tumbler lock with a hardened steel centre and body. The loft hatch offers a higher level of security for items stored in the attic, and helps to discourage children from entering the attic space.

The SDL loft access hatch is compatible with our entire range of loft ladders.

The SDL loft trap has concealed hinges and a completely flush lid to frame, giving a contemporary simplistic look.

The loft hatch has a neat recessed double-pin tamperproof lock with integral chamfer for a smooth closing action. Two keys are supplied, further keys can be purchased on request.

In addition to the draught seal between the loft hatch frame and lid, the SDL has an extra concealed draught seal between the frame and ceiling. This virtually eliminates vapour ingress and warm air leakage, it also helps with decorating the ceiling up to the edge of the frame.

The loft hatch colour is white RAL No. 9010 with 20% gloss.

The loft hatch ceiling cut out (trim) size is 755mm x 555mm.

Easy to fit, weighing only 7.6kg, with fitting instructions on the box.

Strictly compliant to the following regulations:

UKAS accredited 1 hour fire test.

Part "L" of building regulations i.e. thermal 0.35 "U" value.

NHBC compliant for loft access traps, including a 520mm clear opening in any direction (without having to remove the frame).

UKAS accredited test for air infiltration on loft hatches without the addition of sealant to the external frame.

In addition:

The fitted loft trap insulation is HCFC & CFC free, ODP zero and compliant to Eco Homes standards of a GWP (global warming potential) rating of zero.

The SDL loft access trap box packaging is 100% recycled material & 100% recyclable.

The SP1 loft hatch is draught sealed between frame and lid to virtually eliminate warm air leakage.

White colour is RAL No. 9010 with 20% gloss.

The ceiling cut out (trim) size for the loft hatch is 555mm x 555mm.

Easy to fit instructions are on the box.

Strictly compliant to the following regulations:

UKAS accredited 1 hour fire test.

Part "L" of building regulations i.e. 0.35 "U" value.

NHBC compliant for attic doors, including 520mm clear opening in any direction.

UKAS accredited air infiltration test compliant for loft hatches without addition of sealant to external frame.

In addition:

Insulation used is CFC & HCFC free, ODP zero and compliant to Eco Homes standards of a GWP (global warming potential) rating of zero.

The SP1 loft access trap box packaging is 100% recycled & recyclable.

Please note the SP1 cannot be used with any of our loft ladders.

The SP2 loft hatch is draught sealed between the frame and lid to virtually eliminate warm air leakage. It also reduces cold air and vapour leaking in from the loft.

The white colour of the loft hatch is RAL No. 9010 with 20% gloss.

The ceiling cut out (trim) size for the loft hatch is 755mm x 555mm.

Easy to fit instructions are on the box.

Strictly compliant to the following regulations:

1 hour fire test to UKAS standards.

Exceeds Part "L" of the thermal building regulations to 0.35 "U" value.

NHBC compliant for attic doors, including 520mm clear opening in any direction.

The loft hatch is UKAS air infiltration tested without the need for extra sealant to the external frame and ceiling.

In addition:

The ceiling hatch insulation is CFC & HCFC free, ODP (ozone depletion) zero and compliant to Eco Homes standards of a GWP (global warming potential) rating of zero.

The SP2 loft access trap box packaging is made from 100% recycled cardboard and 100% recyclable.

Please note the SP2 cannot be used with our loft ladders.

The SP3 loft hatch is draught sealed between the frame and lid to reduce vapour and warm air leakage. The loft trap frame and lid are white colour in colour to RAL No. 9010 with 20% gloss. The box packaging is 100% recycled and recyclable with easy to fit instructions on the box. The Insulation used is CFC & HCFC free, ODP zero and compliant to Eco Homes standards of a GWP (global warming potential) rating of zero. Please note the SP3 ceiling hatch cannot be used with any of our loft access ladders.