(0)
£0.00 (ex. VAT)
Slither 1 Slither 2 Slither 3

PD Loft Hatch | 3 Insulation Options | 760 x 560mm Hinged

code:n/a
From £28.50 (ex. VAT)
( £34.20 (inc. VAT) inc. VAT)

Discounts for bulk order

1+5+10+30+
£28.50 (ex. VAT) £25.00 (ex. VAT) £22.35 (ex. VAT) £21.20 (ex. VAT)
Item in Stock  |  Usually dispatched within 24 hours
Order in the next 18 hours and 14 minutes for delivery by Monday 31st, July.
Restrictions may apply.
This product has been added to your basket...
  • Continue Shopping
  • Checkout
  • Lid hinged on short side of frame, to open twist the catch and open lid downwards
  • Fitted with draught seals
  • Choose between budget 100mm insulation for the PD35, Carbon Coated EPS for the PD25, or 150mm EPS insulation for the PD15. All in excess of Part "L" compliancy
  • Fits a minimum structural opening of 760 x 560mm (Can be fitted up to 765 x 565mm)
  • Clear opening when installed (PD35 & PD25 630 x 533mm, PD15 580 x 533mm)
  • Overall frame size 828 x 628mm
  • Maintenance free
  • Guaranteed not to discolour

Product description

Hinged loft hatch: Slim, contemporary frame with flat lid. Frame is fitted with compression seals to prevent draughts between the frame and the lid. When closed the lid is compressed against draught seals. Easy to open and close with simple turn of the catch. Made from white injection moulded plastic, requires no decorating or maintenance.

Insulation and U Values explained

This loft hatch has a choice of three insulation options so you can tailor your hatch to suit your budget. insulation requirements. the thermal efficiency of insulation is represented by its U Value, the lower the number the more effective the insulation. The insulation values for the loft hatch range are listed below by model reference:

PD35 - U Value 0.35 (Complies with Part L of Building Regulations)
PD25 - U Value 0.25 (exceeds Part L of Building Regulations by 20%)
PD15 - U Value 0.15 (exceeds Part L of Building Regulations by 80%)

Part L of Building Regulations, please note, the current building regulations for new build properties require hatches to have a U Value of 0.35. You are under no obligation to match this, however a well insulated loft hatch can help reduce your heating requirements and reduce your heating bills and Carbon emissions.

Fitting information, the hatch has pre-formed screw holes in the frame. Easy to DIY fit.
Compatibility with loft ladders:

This range of loft hatches are compatible with our entire loft ladder range. Please note due to the increased insulation depth of the PD15 if you want to use this hatch with a loft ladder the PD15, a distance of at least 250mm deep joists/timber plant combination will be required, if less than you will have to raise the ladder fixing point, with a timber plant.

Further information

NHBC compliant for a loft hatch, to a minimum of 520mm clear opening in any direction.

UKAS accredited air infiltration test, compliant for loft hatches without addition of extra sealant to the external frame. In addition: The loft hatch insulation is CFC & HCFC free, ODP zero and compliant to "The Code For Sustainable Homes" standards of a GWP (global warming potential) rating of less than 5 (standing at zero).

Note: there is a visible extrusion point on the lid, see photo

5.00 out of 5 based on 2 ratings.
Showing 2 of our total 31 reviews, with an average rating of 5 stars. Read all 31 reviews for PD Loft Hatch | 3 Insulation Options | 760 x 560mm Hinged .
Write a review ›
  • Currently 5/5 Stars.
5Loft hatch

Excellent product

| Write a Review ›
  • Currently 5/5 Stars.
5Loft hatch cover

I've been looking for a new loft hatch cover for some time saw this site for Jupiter blue so gave it a go and I'm so pleased I did good product and was here the following morning very quick and easy to install need one for another project so will be back to purchase another soon