(0)
£0.00 (ex. VAT)

Econotrap Loft Hatch | 4 Insulation Options | 720 x 560mm Push-Up

code:n/a
From £21.23 (ex. VAT)
RRP: £21.23 (ex. VAT) You Save: £4.03 (ex. VAT) (19%)
( £20.64 (inc. VAT) inc. VAT)
Item in Stock  |  Usually dispatched within 24 hours
Order in the next 70 hours and 36 minutes for delivery by Tuesday 13th, December.
Restrictions may apply.
This product has been added to your basket...
  • Continue Shopping
  • Checkout
1+5+10+25+50+
£21.23 (ex. VAT) £20.05 (ex. VAT) £18.90 (ex. VAT) £17.92 (ex. VAT) £17.20 (ex. VAT)
  • "Old fashioned" push-up and move to one side lid
  • Choose the insulation to suit your budget/ energy saving requirement
  • Fit a minimum structural opening of 720 x 560mm (Can be fitted into openings up to 740 x 580mm)
  • Clear opening from 655 x 533mm
  • Overall frame size 830 x 675mm
  • Maintenance Free
  • Guaranteed not to discolour
  • Easy to fit
  • Pre-fitted seals between frame an lid to aid draught reduction

Product description

Two piece push up loft hatch comprising: decorative frame with flat lid. Frame is fitted with compression seals to prevent draughts between the frame and lid. Lid locates in place and is held in position by four built in securing pins which locate automatically behind the lid when closed. Made from white injection moulded plastic, requires no decorating or maintenance.

Insulation options and U Values explained

This loft hatch has a choice of four insulation options so you can tailor your hatch to you budget/ insulation requirements.

The thermal efficiency of insulation is represented by its U Value, the lower the number, the more effective the insulation. The insulation values for the econotrap range are listed below by model reference:
ET3    - U Value 0.78 (Budget choice)
ET335 - U Value 0.35 (Complies with Part L of Building Regulations)
ET325 - U Value 0.25 (Exceeds Part L of Building Regulations by 20%)
ET315 - U Value 0.15 (Exceeds Part L of Building Regulations by 80%


Part L of Building Regulations, please note, the current building regulations for new build properties require hatches to have a U Value of 0.35. You are under no obligation to match this, however a well insulated loft hatch can help reduce your heating requirements and reduce your heating bills and Carbon emissions.

Fitting information, the hatch has pre-formed screw holes in the frame. Easy to DIY fit, offer the frame up to the loft opening and screw fix (fixing screws are supplied with your hatch) into frame.


Technical drawings

ET3 Click to view
ET335 Click to view
ET325 Not available
ET315
Click to view

5.00 out of 5 based on 2 ratings.
Showing 2 of our total 4 reviews, with an average rating of 5 stars. Read all 4 reviews for Econotrap Loft Hatch | 4 Insulation Options | 720 x 560mm Push-Up.
Write a review ›
  • Currently 4/5 Stars.
4Loft hatch insulation type: ET335 100mm EPS Insulation - 0.35 U Value

So far I think this is a pretty good hatch fitting. It is not yet installed properly because its width is exactly the same as the gap between rafters in our loft. I have bought 2 tools so far to widen the gap between the rafters and it still will not drop into place. There is a third tool one on its way - a rotating rasp to fit onto a power tool so that I can widen the gap a few more millimetres. All my problem though in having a co-incidence in widths! Delivery was prompt and the web site had all the information needed. So Jupiter Blue are the good guys in my saga!

| Write a Review ›
  • Currently 5/5 Stars.
5First Class

I made a mistake in my order and they corrected my problem very efficiently

| Write a Review ›