Our HA hinged plastic access panel range provides a simple, low cost, high quality solution for access to building services in walls and ceilings. The injection moulded slim profile picture frame, with smooth rounded corners produces a lightweight solution, enabling an easy fit installation into all types of wall or ceiling construction.

Handi access panels available in 5 sizes, as shown below (please note 560x560mm is suitable for wall application only).

Economy steel access panel with a flush slimline 25mm one piece picture frame. No welding, just simple clean lines - genius! The access door is fitted with a chrome, slotted quarter turn lock. The access door and frame are polyester powder coated in white RAL 9010 with 20% gloss for a silk rather than a highly polished gloss finish.

A classic range of air tight, non-fire rated steel access panels provides access into all types of wall and ceiling construction voids. The panels consist of 1.0mm powder coated zintec steel with a slim profile, producing a lightweight, robust panel where access to building services is required.

A superior quality, neat made to measure access panel with a picture frame, to suit all wall construction types. The access panel is air and vapour sealed between the frame and door with a budget polished steel tri-drive lock or a secure key lockable version

The access door is hinged with a concealed continuous full length hinge.

This access panel is not fire rated (please refer to "fire rated" section).

The white powder coating RAL No. is 9010

Maximum size is 900mm tall by 750mm wide (please call to discuss if larger as the price and product structure will change).

A white smooth contemporary Circular Plastic Access Panel with a simple twist action on a fine thread to easily open or close.

Six concealed face fixing points allow for an easy screw fix installation into any wall finish.

An "O" ring is imbedded within the inner section of the frame to give an airtight seal.

Combines a flush Steel circular panel with a picture or beaded frame, to give a contemporary finish.

For use in ceilings constructed from plasterboard screw fixed to a metal suspension system or plasterboard to timber joists.

This saw is designed specifically for cutting dry wall panels and plasterboard. It is ideal for forming the opening to fit a new access panel. The sharp pointed tip is used to 'jab' into the material and start the cutting process with its 150mm (6in) blade. A sturdy sheath protects the blade when not in use. ard point saw with soft grip handle. Designed for cutting circles on plaster board, chip board or hard board. Used to cut wood, plywood, chipboard, plastic etc.